Habka qoyan ee soo jireenka ah ee ciidda dad-sameega ah, carrada-carrada iyo fuuq-baxa ciid-wareegga, luminta ciidda dad-sameega ah (gaar ahaan ciid wanaagsan) ayaa ah mid aan la xakamayn karin.Qalabka dib-u-warshadaynta ciid wanaagsan ayaa si wax ku ool ah u yareynaya socodka ciidda wanaagsan, wuxuuna hoos dhigayaa xakamaynta 5-10%.Waxay si fiican u xallisaa dhibaatada cutubka ganaaxa aan fiicneyn ee ciid-bini'aadamka, saamiga hoose ee budada dhagaxa ee nidaamka habaynta wadarta.
Taxanaha SS Fine Sand Nidaamka Ururinta - SANME
Wax soo saarka
FAA'IIDOOYINKA TECHNOLOGY EE TAXANAHA SS NIDAAMKA URURINTA CIIDA FIICAN
Wareegga (swirler) ee lagu daboolay Polyurethane wuxuu u oggolaanayaa nidaamka oo dhan si aad u waara, oo wuxuu fuliyaa hawlaha sida saxarka isku ururinta, caddaynta dareeraha.
Habka dib-u-warshadaynta ciidda Fin wuxuu dib u warshadeeyaa ugu badnaan 85% qaybo fin wadarta tirada dheecaanka.Waxay leedahay faa'iidooyin farsamo iyo dhaqaale oo aan la barbar dhigi karin qalabka kale.
Shaashadda gariirku waxay ku qalabaysan tahay dusha sare ee Polyurethane, taas oo ka adkeysi badan tan maaddooyinka kale, iyada oo meshes-yada aysan sahlaneyn in la xiro.
Qaybaha si ku filan dib loo warshadeeyay, culayska shaqada iyo kharashka nadiifinta ee weelka wasakhaynta waa la dhimi doonaa.
Habka dib-u-warshadaynta cammuudda fiican waxa ay yaraynaysaa wakhtiga rarista alaabta finka ah, waxa ayna xaqiiqsato gaadiid toos ah iyo suuq geyn.
Naqshadaynta kala duwan ee shuruudaha macaamiisha kala duwan.
Xogta Alaabta
Xogta Farsamo ee Taxanaha SS ee Nidaamka Ururinta Ciid Wanaagsan
| Qaabka | Bambo | Cyclone Spec.(mm) | Shaashada biyo-baxa | Awoodda (t/saac) | Cabirka Guud (LxWxH) (mm) | |||
| Awood (kw) | Cabbirka (inch) | Qaabka | Cabirka sagxada (m2) | Awood (kw) | ||||
| SS-06-300 | 7.5 | 2 " | 300 | 0.6×1.5 | 0.9 | 2×0.75 | 40-60 | 3590x1342x2561 |
| SS-08-300 | 18.5 | 3 " | 300 | 0.8×2.25 | 1.8 | 2×1.5 | 40-100 | 4565x1402x2947 |
| SS-10-350 | 18.5 | 4 " | 350 | 1.0×2.25 | 2.25 | 2×1.5 | 70-114 | 4622x1682x4237 |
| SS-12-550 | 37 | 5 " | 550 | 1.2×3.0 | 3.6 | 2×2.2 | 150-300 | 6009x2014x3820 |
| SS-12-650 | 37 | 5 " | 650 | 1.2×3.0 | 3.6 | 2×2.2 | 150-320 | 6011x2028x4060 |
| SS-14-750 | 45 | 6 " | 750 | 1.4×3.0 | 4.2 | 2×3.0 | 180-343 | 6013x2042x4300 |
| SS-14-750II | 55 | 6 " | 750 | 1.4×3.0 | 4.2 | 2×3.0 | 230-420 | 6659x2042x4202 |
| SS-16-2×650 | 55 | 10 " | 2×650 | 1.6×3.75 | 6 | 2×5.5 | 350-800 | 7384x2350x4650 |
| SS-18-2×750 | 75 | 10 " | 2×750 | 1.8×3.75 | 6.75 | 2×7.5 | 350-1000 | 7780x2545x4800 |
Awoodaha qalabka ee liiska ku jira waxay ku salaysan yihiin muunad degdeg ah oo ah qalabka adag ee dhexdhexaadka ah. Xogta kor ku xusan waa tixraac kaliya, fadlan la xiriir injineeradayada xulashada qalabka mashaariicda gaarka ah.
HORDHAC AALADAHA TAXANAHA SS NIDAAMKA URURINTA CID FIICAN
Hadda, khadka wax-soo-saarka ciidda ee ugu badan ee bani-aadamku sameeyay wuxuu qaataa habka qoyan.Si kasta oo ay ahaataba nooca maydhista ciidda ay adeegsadaan, daciifnimada ugu weyni waa luminta ciid wanaagsan (ka hooseeya 0.16mm), mararka qaarkood khasaaruhu waa ilaa 20%.Dhibaatadu ma aha oo kaliya luminta ciidda lafteeda, laakiin sidoo kale waxay keentaa qallafsanaanta ciidda aan caqligal ahayn iyo cutubka ganaaxa qalafsan, waxay saamaysaa tayada ciidda.Waxaa intaa dheer, qulqulka ciidda xad dhaafka ah wuxuu keenaa wasakhowga deegaanka.Si looga jawaabo dhibaatadan, shirkadeena waxay faahfaahisay nidaamka dib-u-warshadaynta ciid wanaagsan ee taxanaha SS.Nidaamkani wuxuu nuugaa tignoolajiyada horumarsan ee adduunka, wuxuuna qaataa aragtida xaalad shaqo oo la taaban karo.Waxay u dhaxaysaa heer caalami ah.Beeraha lagu dabaqi karo waa nidaamka processing wadar ah ee dhismaha tamarta biyaha, nidaamka processing for alaabta ceeriin galaas, line soo saarista ciidda nin-dhigay, dib u warshadaynta dhuxusha aan dhab ahayn iyo nidaamka ilaalinta deegaanka (sifinta dhoobada) ee warshad diyaarinta dhuxusha, iwm ururinta ciid wanaagsan.
MABADA SHAQADA EE TAXANAHA SS NIDAAMKA URURINTA CIIDA FIICAN
Qaab dhismeedka: Waxay inta badan ka kooban tahay matoor, bamka dareeraha haraaga ah, duufaanta, shaashadda gariirta, haanta biyo raaci iyo sanduuqa dib u warshadaynta, iwm.
Mabda'a shaqada: Isku dhafka ciidda iyo biyaha waxaa lagu qaadaa duufaanta iyadoo la raacayo bamka, iyo ciidda wanaagsan ka dib fiirsashada kala-soocidda centrifugal waxaa la siiyaa shaashadda gariirta oo leh afka gogosha, ka dib marka shaashadda gariirto, ciidda wanaagsan iyo biyaha ayaa si wax ku ool ah loo kala saaraa. .Sanduuqa dib-u-warshadaynta, ciid yar oo wanaagsan iyo dhoobo ayaa mar kale ku soo noqda taangiga biyo raaci, ka dibna waxay ka daalaan daloolka dheecaanka marka heerka dareeraha taangiga biyo raaci uu aad u sarreeyo.U fiirsashada miisaanka alaabta ee ay soo celisay shaashadda gariirada tooska ah waa 70% -85%.Hagaajinta qaybta ganaaxa waxa lagu xaqiijin karaa iyada oo la beddelo xawaaraha wareega wareega ee bamka iyo feejignaanta saxarka, nidaaminta wax-soo-saarka biyaha qulqulaya iyo beddelidda afka xashiishka, sidaas awgeed waxay ku guulaysataa saddexdeeda hawlood - dhaqid, biyo-mareen iyo kala-saarid.
Halkan ku qor fariintaada oo noo soo dir
