E-VSI Series Vertical Shaft Impact Crusher – SANME

VC7 Series Vertical shaft Impact Crusher, which are high-functioned equipment for making sand and shaping, are developed and produced by SANME. Thin oil lubrication excels traditional lubrication in many aspects: larger rotation rate, patent sealing structure, and high sand production ratio.

CAPACITY : VC7(H) series: 60-1068t/h; VCU7(H) series:90-1804t/h
MAX FEEDING SIZE : 35-100mm
RAW MATERIALS : Iron ore, copper ore, cement, artificial sand, fluorite, limestone, slag, etc.
APPLICATION: Engineering, highway,railway, passenger line, bridges,airport runways,municipal engineering,high-rise

CONTACT NOW

Introduction

Display

Features

Data

Product Tags

Product Dispaly

FEATURES AND BENEFITS OF VC7 SERIES VERTICAL SHAFT IMPACT CRUSHER

Check the vortex chamber to see if the door is closed tightly before driving to prevent sand and stone from rushing out of the vortex chamber observation door and causing danger.

Check the rotation direction of the impeller, from the direction of the inlet, the impeller should be rotated counterclockwise, otherwise the motor wiring should be adjusted.

The starting sequence of sand making machine and conveying equipment is: discharge → sand making machine → feed.

The sand making machine must be started without load and can be fed after normal operation. The stop order is the opposite of the start order.

The feeding particles in strict accordance with the requirements of the provisions, prohibit more than the specified material into the sand making machine, otherwise, it will cause the impeller imbalance and excessive wear of the impeller, the base to cause blockage of the impeller channel and the central feeding pipe, so that the sand making machine can not work normally, found that the bulk of the material should be eliminated in time.

The lubrication of the machine: use the required special grade of automotive grease, add the amount of 1/2-2/3 of the bearing cavity, and add the appropriate amount of grease for each working shift of the sand making machine.

Product Data

Technical Data of VC7(H) Series Vertical Shaft Impact Crusher:

Model	Feeding Size(mm)	Speed of Rotor(r/min)	Throughput(t/h)	Motor Power(kw)	Diameter of Impeller（mm）
E-VSI-110	≤30	1485	30-60	110	900
E-VSI-160	≤30	1485	40-80	160	900
E-VSI-200	≤40	1485	60-110	200	900
E-VSI-250	≤40	1485	80-150	250	900
E-VSI-280	≤50	1215	120-260	280	1100
E-VSI-315	≤50	1215	150-300	315	1100
E-VSI-355	≤60	1215	180-350	355	1100
E-VSI-400	≤60	1215	220-400	400	1100

The crusher capacities listed are based on instantaneous sampling of medium hardness material. The above data are for reference only, please contact our engineers for equipment selection of specific projects.

The chamber configuration of VC7 Series Vertical Shaft Impact Crusher

Single motor driving, lower power consumption.

Simple structure, convenient installation & maintenance, lower operation cost.

Premium product shape-cubical,low percentage of flake shape product.

WORKING PRINCIPLE OF VC7 SERIES ROTOR CENTRIFUGAL CRUSHER

The materials fall into impeller with high-speed rotation vertically. On the force of high-speed centrifugal, the materials strike to the other part of material in a high speed. After mutual impacting, the materials will strike and rub between the impeller and the casing and then be discharged straight from the lower portion to form a closed multiple cycles. Final product is controlled by screening equipment to meet the requirement.